Tips for Recovering Photos from Canon EOS Rebel T2i Digital Camera

Canon EOS Rebel T2i, a high-definition DSLR camera, that hosts a great range of professional photography features, including 18MP CMOS sensor and 1080p HD video recording. With an ability to capture 3.7 frames in a second, this Canon product is a leading example of a smart product.

Canon EOS Rebel T2i digital camera supports SD, SDHC, and SDXC memory cards as its recording media, which might get corrupt and inaccessible for several reasons. Hence, while enjoying powerful imaging technology of Canon EOS Rebel T2i camera, it is equally important to backup data as frequently as possible. Once corrupted, the memory cards of this digital camera won't allow you to read the images and videos unless you apply a supporting Digital camera photo recovery utility.

When memory card (SD, SDHC, or SDXC) of Canon EOS Rebel T2i camera gets corrupted, it loses communication with the camera or any other device that might try to access it. At this point, any one of the following error messages might appear when trying to access the card:

“Memory card error”

Or

“Card is not formatted”

Alternatively, you may find the card capacity of memory card misreported in Canon EOS Rebel T2i camera. Also, corruption of camera's internal memory is one of the main causes of digital data loss in this camera.

Recommendations:

Canon EOS Rebel T2i camera fails to read data too often. However, the following suggestions can help you avoid such situations:

1.Avoid filling up the memory card. The probability of FAT (file allocation table) file system corruption increases dramatically when the media is full to about 90% of its storage capacity.

2.Do not let the camera battery to run down. The memory card might get corrupt if it doesn't get sufficient power to write data.

3.Initialize, format, and delete images from the card only when it is inside Canon EOS Rebel T2i camera. Some of the devices might fail to recognize the media card format.

4.Make sure that your Canon EOS Rebel T2i camera always get sufficient time to complete its read/write operation.

There are several Digital camera photo recovery software available in the market, that can restore lost or deleted pictures from Canon EOS Rebel T2i and its media cards. Using powerful scanning, these software are competent recovery utilities that perform Digital camera data recovery in almost each case of logical data loss. This tool is designed to recover lost audios, video clips, and images from a variety of Canon cameras. Available in two variants, one each for Mac and Windows, this utility supports most of the digital file formats.

How to recover lost pictures from Panasonic Lumix GF1 Digital Camera Memory Cards

Memory card corruption is a common problem encountered by most of the users using digital cameras, mobile phones, or camcorders. Corruption can occur at any point, rendering to inaccessibility of all images, audios, videos, and other digital media files saved in the memory card. Few common memory card corruption reasons are improper handling of the digital camera, interrupted read or write operation, and malicious software like virus. While an updated backup allows the user to restore all his digital files, its absence can result in loss of beautiful memories. However, there is no reason to worry as the files can still be recouped using an effective third-party SD Card recovery software

To elaborate the memory card corruption, consider, you have a Panasonic Lumix GF1 camera with SDHC (Secure Digital High Capacity) memory card to store your images. The card worked fine till your camera switched off while you were clicking some pictures (battery empty). Now, when you try to view previously saved images, you get the below error message:

“MEMORY CARD ERROR”

After this error message, all the images saved in the SDHC memory card became inaccessible. As the camera was unable to surmount the above error message, you could not even capture any new pictures.

Cause:

The above error message appears only when SDHC memory card was corrupted.

Resolution:

To overcome SDHC memory card corruption, you need to:

i.Restore all inaccessible images from valid and up-to-date backup. In most cases, the backup is saved on some other storage media.

ii.In case of backup unavailability, you will need to format the memory card in the camera.While formatting enables you to save new images, it also deletes previously saved images in SDHC card.

iii.To recoup lost images after formatting, a commercial Digital camera photo recovery tool needs to be used. Such Photo Recovery Software can be used by any user, irrespective of his technical understanding. This is because the recovery software are designed to be user-friendly.

Stellar Phoenix Photo Recovery is an effective and risk-free software that recovers lost pictures after formatting your digital camera and other devices. Compatible with SD, SDHC, xD, CF, and other memory cards, the recovery tool recovers image file types like JPEG, GIF, BMP, TIFF, etc. With different versions designed for Windows and Mac OS X, the software allows you to save recovered photos at specified destination.

Fixing “Error Writing to CF Card” Error Message

Sigma SD9 takes the lead in being the world's first camera to use revolutionary Foveon X3 sensor. The high resolution digital SLR camera uses Compact Flash (CF) memory card to save all the digital data. The CF memory card needs to be formatted before you save any new pictures. This enables you to overcome any previous damage done to the memory card and to erase the old data saved on the card. However, the probability of card getting corrupted again (after you have saved new data) still exists. In such cases, if you re-format the memory card, then all the new data saved in the memory card is lost. To access the new data after reformatting, you need to restore it from a valid backup. But, if you have not maintained any backup, then only a powerful card recovery software can recover your photos.

To illustrate the above case, consider the below scenario. You format a CF memory card in Sigma SD9, and save new pictures. However, while saving more pictures, your camera shuts down due to low battery. This shutdown occurred when your camera was performing some read/write operation. Now, when you attempt to access any photograph on the card, you receive the below error message:

“Error writing to CF card”

Additionally the camera is unable to capture any new photographs.

Cause:

The main cause for the above error message is corruption of memory card due to interrupted read/write operation.

Resolution:

The above error message can be resolved only by re-formatting the memory card. In such cases, the photographs saved in the memory card get deleted. To recover the deleted photographs after formatting process is over, you need to opt for an advanced photo recovery application. A Digital photo recovery tool employs effective recovery algorithms to recover lost, deleted, or formatted data. The recovery utility ensures complete recovery of almost all file formats and allows you to restore the recoverable data at required location.

Digital camera data recovery utility is designed with an interactive user-interface, which makes the recovery process easier and simpler. The tool supports Windows (Windows 7, Vista, XP, 2003, 2000, and NT) and Mac OS X (10.6 Snow Leopard, 10.5 Leopard, 10.4 Tiger, and 10.3.9 Panther) operating system.